Aroma volatile compositions of high- and low-aromatic guava varieties

BACKGROUND: The traditional guava variety cultivated in Israel, ‘Ben Dov’, emits a very strong odour, whereas some newly bred varieties have a mild odour. In this study the aroma profile composition of the high‐aromatic ‘Ben Dov’ variety was compared with those of four new low‐aromatic varieties. RESULTS: Overall, using gas chromatography/mass spectrometry, a total of 30 aroma volatiles were detected in fresh ripe guava fruit: 15 of them were specifically detected only in the high‐aromatic ‘Ben Dov’ variety, 13 were detected in both the high‐ and low‐aromatic varieties and two were detected only in the new low‐aromatic varieties. Interestingly, 11 out of the 15 volatiles specifically detected in ‘Ben Dov’ were esters that contribute sweet, tropical and fruity notes. In contrast, ten out of 13 detected terpenes and two detected aldehydes, contributing green, spicy, herbal and woody notes, were common to both the high‐ and low‐aromatic varieties. CONCLUSION: Based on these findings, it is concluded that accumulation of esters is the main reason why the traditional ‘Ben Dov’ guava variety emits such a strong tropical fruity odour. In contrast, the newly bred low‐aromatic guava varieties did not synthesise esters at all and thus lacked fruity aromatic notes. Overall, the results of this study point out the important role of esters in forming tropical fruity guava odours. Copyright © 2011 Society of Chemical Industry     

Analysis of delay mean and variance of collision-free WDM rings with segment recirculation of blocked traffic

In Tunable-Transmitter Fixed-Receiver (TT-FR)-based Wavelength Division Multiplexed (WDM) ring topologies, each node is provided with a dedicated wavelength (home channel) for reception, which must be shared by the upstream nodes willing to communicate with it. Thus, to avoid channel collisions, it is necessary to define a Medium Access Control (MAC) mechanism that arbitrates access to a given destination wavelength. This work proposes and analyses a simple MAC mechanism that avoids channel collisions by recirculating traffic on the upstream ring segment where congestion was detected. Essentially, whenever a given node has got any traffic to transmit, it must first block access to in-transit traffic, which is reflected back to the upstream node over a second optical fibre. Such blocked traffic is given a second chance to pass through the congested node after a round segment delay, thus making use of the ring topology as buffering units. This work analyses the performance operation of such a MAC protocol under two policies applied to recirculated traffic: (1) recirculation bypass and (2) recirculation store-and-forward.     

An Adaptive Learning Scheme for Medium Access with Channel Reservation in Wireless Networks

Providing effective medium access for wireless networks is a challenging task. Most of the existing protocols of IEEE 802.11 Medium Access Control (MAC) work towards the goal of achieving effective channel access by developing various backoff procedures. In this paper, we make an attempt to develop a new medium access protocol named Learning Automata (LA) based Wireless Channel Reservation (LAWCR). We use an LA approach to implement reservation for channel access for single hop wireless networks. Also, sequence procedure is used to improve the reservation mechanism. The performance of the proposed LAWCR scheme show significant improvements over the legacy DCF protocol with respect to important criteria such as the average time spent in the buffer and the throughput.     

Evaluation of the occurrence and biodegradation of parabens and halogenated by-products in wastewater by accurate-mass liquid chromatography-quadrupole-time-of-flight-mass spectrometry (LC-QTOF-MS)

An assessment of the sewage occurrence and biodegradability of seven parabens and three halogenated derivatives of methyl paraben (MeP) is presented. Several wastewater samples were collected at three different wastewater treatment plants (WWTPs) during April and May 2010, concentrated by solid-phase extraction (SPE) and analysed by liquid chromatography-electrospray-quadrupole-time-of-flight mass spectrometry (LC-QTOF-MS). The performance of the QTOF system proved to be comparable to triple-quadrupole instruments in terms of quantitative capabilities, with good linearity (R² > 0.99 in the 5-500 ng mL⁻¹ range), repeatability (RSD < 5.6%) and LODs (0.3-4.0 ng L⁻¹ after SPE). MeP and n-propyl paraben (n-PrP) were the most frequently detected and the most abundant analytes in raw wastewater (0.3-10 μg L⁻¹), in accordance with the data displayed in the bibliography and reflecting their wider use in cosmetic formulations. Samples were also evaluated in search for potential halogenated by-products of parabens, formed as a result of their reaction with residual chlorine contained in tap water. Monochloro- and dichloro-methyl paraben (ClMeP and Cl₂MeP) were found and quantified in raw wastewater at levels between 0.01 and 0.1 μg L⁻¹. Halogenated derivatives of n-PrP could not be quantified due to the lack of standards; nevertheless, the monochlorinated species (ClPrP) was identified in several samples from its accurate precursor and product ions mass/charge ratios (m/z). Removal efficiencies of parabens and MeP chlorinated by-products in WWTPs exceeded 90%, with the lowest percentages corresponding to the latter species. This trend was confirmed by an activated sludge biodegradation batch test, where non-halogenated parabens had half-lives lower than 4 days, whereas halogenated derivatives of MeP turned out to be more persistent, with up to 10 days of half-life in the case of dihalogenated derivatives. A further stability test performed with raw wastewater also showed that parabens degrade rapidly in real sewage, with half-lives lower than 10 h for n-butyl-paraben, while dihalogenated species again turned out to be more stable, with half-lives longer than a week.     

Nonisothermal Simulation of Flows in the Hot-Gas Filter Vessel at Wilsonville

A numerical simulation of nonisothermal gas flows in the hot-gas filter vessel at the Power Systems Development Facility in Wilsonville, Alabama is presented. The gas velocity and thermal simulations are based on the Reynolds stress transport turbulence model of the FLUENT TM commercial CFD computer code. While earlier modeling studies were limited to isothermal conditions, in this study, the energy transport equation was solved in addition to the mass and momentum equations. The gas flow and temperature field inside the filter vessel were also studied. Results reveal that the gas flow shows strong rotating flow regions outside the shroud and in the upper and lower parts of the body of the vessel. It is also shown that the temperature distribution is nonuniform with somewhat higher temperatures in the upper part of the filter. The simulated results qualitatively agree with the experimental field observations of the filter vessel.

filter vessel numerical simulation nonisothermal FLUENT     

Characterization of synthetic hydrocalumite-type [Ca2Al(OH)6]NO3·mH2O: Effect of the calcination temperature

A lamellar hydrocalumite-type [Ca₂Al(OH)₆]NO₃·mH₂O, (HC), was synthesized and characterized by X-ray diffraction analysis (XRD), surface area, pore size measurements, CO₂-Thermal Programmed Desorption, and later tested as catalysts in the double bond isomerization of 1-butene. The layered structure of HC collapses above 523 K yielding an amorphous material at 573 K which upon calcination at 873–973 K transforms into a mixture of CaO and mayenite Ca₁₂Al₁₄O₃₃. The calcination temperature has a marked effect in the formation of basic sites. Thus for example, HC calcined at 1073 K shows 90% of strong basic sites (CO₂ desorption at 1023 K) while they are absent in HC calcined at 573–673 K. HC calcined at 973 K shows high catalytic activity (74% conversion) in the isomerization of 1-butene without any appreciable deactivation after 4 h on stream.     

Four Alternative Definitions of the Fuzzy Safety Factor

The concept of safety factor is nearly universally applied in structural engineering. There are presently several approaches for probabilistic interpretation of the safety factors in the literature. Herein we generalize the above approaches to derive four possible definitions of safety factor that are based on fuzzy sets: (1) the central fuzzy safety factor is defined as the ratio of the centroid abscissas of the membership functions, respectively, of the capacity and the demand of the structure; (2) the characteristic value of fuzzy safety factor as the lower bound of the α cut of the fuzzy safety factor for a specified level of the membership function; (3) the mean value of fuzzy safety factor as the centroid abscissa of the fuzzy capacity-to-demand ratio; and (4) the fuzzy multiplicative safety factor is defined as the abscissa of the centroid of the capacity multiplying to the abscissa of the centroid of the inverse of the demand. Fundamental problem of the strength of materials, namely, tension of an element subjected to an axial load, is analyzed in the context of the above four fuzzy safety factors.     

Medial prefrontal lesion deficits involving or sparing the prelimbic area in the rat

OBJECTIVE: Evaluate wound healing of incisions created by the scalpel, electrocautery, CO2 laser, and potassium titanyl phosphate (KTP) laser in the upper aerodigestive tract in an animal model. STUDY DESIGN: Prospective randomized study in an animal model. METHODS: Postoperative oral intake, histologic depth of injury, and tensile mechanical strength were measured in rat tongues after creating incisions using a scalpel, electrocautery, CO2 laser, and KTP laser. An unpaired, two-tailed Student's t-test was used to compare results between the experimental groups. RESULTS: Oral intake, indirectly assessed by postoperative weight loss, by the third postoperative day was significantly decreased in the electrocautery (P = 0.004), CO2 laser (P = 0.001), and KTP laser (P = 0.0001) groups as compared with the scalpel group. The depth of the wound healing, as assessed by histologic examination, was successively greater for the scalpel (75 +/- 13 microm), electrocautery (110 +/- 10 microm), CO2 laser (145 +/- 10 microm), and KTP laser (195 +/- 23 microm) groups. However, this difference was only statistically significant for the CO2 laser (P = 0.006) and KTP laser (P = 0.01) groups relative to the scalpel group. Wounds created by the KTP laser had the lowest strength (76.5 +/- 6.9 kPa) as compared with the CO2 laser (156 +/- 28.4 kPa), electrocautery (153 +/- 15.7 kPa), and scalpel groups (249 +/- 61.8 kPa). This difference was only statistically significant for the KTP laser group (P = 0.02) when compared with the scalpel group. CONCLUSIONS: Wounds created in the upper aerodigestive tract of rats by scalpels result in the least postoperative weight loss, tissue destruction, and decrease in tensile strength, whereas wounds created by the KTP laser demonstrated a significantly greater postoperative weight loss, depth of wounding, and decrease in tensile strength.